(2) How to Read the Explanations z An exploded view, sectional views, a system diagram, etc. are shown at the beginning of each section as required for easy understanding of the mounted states of the components. z For the removal/installation of each part, the procedure is shown with the procedural step No. in the illustration. z Precautions and key points for disassembly and reassembly of parts are described as points . In the explanation for each point, detailed operation method, information, standard and precautions are described. Description Example The job contents are described in the disassembly procedure for Nos. not shown in the illustration.
z Disassembly procedure 1) Follow steps (1) to (15) of the cylinder head disassembly procedure. 2) Remove the cooling water pump. 3) Remove the crankshaft pulley. ( Point 1 ) Operation point to be explained on a later page. z Operation points Disassemble: Service point for removal Reassemble: Service point for installation Disassemble-Reassemble: Service point required in both removal and installation.