11. EXPLANATION OF COMPONENTS The following is an explanation of the devices needed for operating the machine. To carry out suitable operations correctly and safely, it is important to understand fully the methods of operating the equipment and the meanings of the displays. REMARK The following explanation covers two types of machine: machines where the engine stops when the fuel control lever is set to the engine STOP position (machines stopped by the fuel control lever), and machines where the engine stops when the starting switch is turned to the OFF position (ma- chines stopped by the starting switch). 11.1 METERS AND LAMPS 1 1.
ENGINE WATER TEMPERATURE GAUGE This gauge indicates the cooling water temperature. When the indicator is in the green range during operation, the water temperature is normal. If the indicator moves from the green range into the red range during operation, stop the machine and run the engine with no load at medium speed until the water temperature goes down. After starting the engine, warm up it until the indicator moves into the green range. 2-4