11. EXPLANATION OF COMPONENTS 9. SAFETY LEVER (For blade control lever) A WARNING When leaving the operator’s compartment, set the safety lever securely to the LOCK position. If the con- trol lever is not locked, and it is touched by mistake, this may lead to a serious accident. If the safety lever is not placed securely in the LOCK position, the control lever may not be properly locked. Check that the situation is as shown in the diagram. When parking or servicing the machine, be sure to lower the blade and set the safety lock in the LOCK position. This is the locking device of blade control lever. Lower the lever to apply the lock. 2-l 2