SAFETY - Seat 1 under the seat bottom cushion and above the fore/aft position adjustment lever. 4. Adjust the seat bottom angle using the switch next to the thigh support. 5. Adjust the seat back recline angle using the large lever situated near the seat belt buckle. 6. Adjust the lumbar support by using the switch bank located on the side the seat cushion between the up/ down adjustment switch and the seat recline adjustment lever. 7. Adjust the steering wheel. 8. Adjust the cab side mirrors. Unbelted riders could be thrown into the windshield or other parts of the cab or could be thrown out of the cab. They could strike another person. Injuries can be much worse when riders are unbelted.
Always observe user warnings pertaining to safety belts. Your vehicle is equipped with a seat belt indicator lamp located on the dash. Correct Use of Restraint Correct Placement of Lap Belt WARNING DO NOT drive vehicle without your seat belt and your passengers' belts fastened. Riding without a safety belt properly fastened can lead to injury or death in an emergency. Correct Placement of Shoulder Belt Safety Restraint Belts Safety belts have proven to be the single most effective means available for reducing the potential for either death or personal injury in motor vehicle accidents. The combination lap/shoulder belt is equipped with a locking mechanism.
The system adjusts automatically to a person's size and movements as long as the pull on the belt is slow. Hard braking or a collision locks the belt. The belt will also lock when driving up or down a steep hill or in a sharp curve. WARNING DO NOT use the swivel function while a passenger is in the seat and the ve- hicle is in motion. The seat belt will not provide proper protection if the pas- senger is not facing forward and the vehicle is in an accident. Failure to comply may result in death or personal injury. 26 Y53-6126-1A1 (01/21)