SAFETY - Seat 1 3. To shorten the tether, pull on the strap. 2. Latch the seat belt. 3. If available, adjust the seat belt height adjuster to a comfortable driving position. 4. While seated appropriately, push the "on" button to engage the Komfort Latch. 5. Learn forward in the seat until you hear a "click." 6. Return to normal driving position, and the Komfort Latch maintains the preset amount of tension relief. More information and video tutorials can be found at: http://www.clicktugsnug.com/ To disengage the mechanism unbuckle the seat belt and then press the OFF button of the Komfort Latch or tug on the shoulder strap. Belt Damage and Repair Damaged belts in the cab must be replaced.
Belts that have been stretched, cut, or worn out may not protect you in an accident. If any seat belt is not working properly, see an Authorized Service Center for repair or replacement. For further information on seat belts and seat belt maintenance, see Safety Restraint System - Inspection on page 247. Komfort Latch Feature Sleeper Bunks and Restraints This vehicle comes equipped with a bunk restraint for the primary lower bunk and the optional upper bunk. These restraints should be used whenever the bunks are occupied by a person while the vehicle is in motion. The sleeper bunk restraint is intended to reduce the risk of being thrown from the bunk in a crash.
This device is not designed to hold the occupant in a fixed position on the bunk and may not prevent all injuries in the event of a crash. WARNING DO NOT set the Komfort Latch with too much slack. Too much slack may reduce the effectiveness of the seat belt. Failure to comply may result in death or personal injury. To eliminate cinching, simply activate the Komfort Latch device located on the seat belt webbing at the appropriate time: 1. Adjust the seat to its proper driving position. 30 Y53-6126-1A1 (01/21)