WARNING: For reasons of safety, always follow these safety precautions. SAFETY Make sure fire extinguishers of the correct type are kept in good condition and convenient to the operators and other personnel. Make sure the appropriate personnel have been trained in their use. Provide a first aid kit at the storage point. Know what to do in the event of a fire. Be sure you know the phone numbers of persons you should contact in case of an emergency. Never operate the machine without a ROPS (ROLL OVER PROTECTIVE STRUCTURE) properly installed and in good condition. The ROPS is installed to protect the operator if the machine should roll over.
It is designed not only to support the load if the machine should roll over, but also to absorb the impact energy. The ROPS fulfills all the regulations and standards for all countries, but if it is rebuilt without authorization or is damaged when the machine rolls over, its strength may suffer and it may be unable be able to fulfill its function properly. It can perform if it is repaired or modified in the specified way. When modifying or repairing the ROPS, always contact your Komatsu America International Company distributor. Even if the ROPS is installed, it cannot show its full effect if the operator does not fasten the seat belt properly. Always fasten the seat belt when operating.
When installing and using an optional attachment, read the instruction manual for the attachment and the information related to attachments in this manual. Do not use attachments that are not authorized by your distributor or Komatsu America International Company. Use of unauthorized attachments could create a safety problem and adversely affect the proper operation and useful life of the machine. Any injuries, accidents, product failures resulting from the use of unauthorized attachments will not be the responsibility of Komatsu America International Company. 1-6 WA420-3MC FIRE EXTINGUISHER AND FIRST AID KIT PRECAUTIONS WHEN USING ROPS PRECAUTIONS FOR ATTACHMENTS