DISASSEMBLY AND ASSEMBLY TURBOCHARGER REMOVAL OF TURBOCHARGER ASSEMBLY 1. Open engine hood. 2. Remove intake hose (1) and turbocharger lubri- cation inlet tube (2). 1 3. Disconnect turbocharger lubrication outlet tube (3) from turbocharger (4). 4. Remove hydraulic pump top cover (5), then re- move air cleaner assembly (6). 2 fl The air cleaner band cannot be removed, so remove hydraulic pump top cover (5). 4 Air cleaner assembly: Approx. 30 kg 5. Remove turbocharger assembly (7). INSTALLATION OF TURBOCHARGER ASSEMBLY Carry out installation in the reverse order to removal. 1 3 Lubrication tube joint bolt (cylinder block end): 29.4 ± 4.9 Nm {3.0 ± 0.5 kgm} 3 Intake connector hose clamp:
8.8 ± 0.5 Nm {0.90 ± 0.05 kgm} 2 3 Turbocharger, air cleaner connecting hose clamp: 8.8 ± 0.5 Nm {0.90 ± 0.05 kgm} 30-20 PC400, 450-6