OPERATING THE MACHINE REMOVING THE MULTI-PURPOSE BUCKET 1. Lower the multi-purpose bucket onto level ground. 2. Switch off the engine. 3. Set the control lever for special equipment first to position ’1’ and then to position ’2’ (fig. 75_042). 4. Turn the change-over lever for the supplementary control cir- cuit to position ‘2’ until it reaches the limit stop (fig. 75_160). 5. Disconnect the multi-purpose bucket hoses from the quick couplings. 6. Restart the engine. 7. Unlock the quick-change unit by setting the control lever for special equipment into position ‘1’ (fig. 75_042). 8. Set the quick-change unit into the dumping position (fig.
75_042) using the multi-function lever, until the quick- change unit is unhooked of the work unit’s pickup hooks. 9. Make sure that nobody is behind the machine and drive the machine away from the work unit. 2 1 75_160 2 3 0 1 75_042 75_016 5-28