MAINTENANCE BASICS TABLE OF LUBRICANTS AND OPERATING AGENTS 7-10 WA75-3 LUBRICANTS AND OPERATING AGENTS BI-CODES*), SPECIFICATIONS, AND FILLING VOLUMES Lubricants and Service Fluids BI-Codes Quality Classes Temperature Ranges Viscosity Classes Filling Vol- ume in Litres approx. Engine Engine Oil EO EO 1540 A EO 1030 A NRS CCMC D4 or, if not available: API CE or API CF-4²) -15° to 45° C -20° to 30° C -15° to 20° C SAE 15W-40 ¹) SAE 10W-30 SAE 05W-30 9.4 Transfer Gear Box: Standard Type High Speed Version Gear Oil GO GO 90 LS API-GL5 +LS or MIL-L-2105D+LS - SAE 90LS 1.0 3.0 Front Axle Gear Oil GO GO 90 LS API-GL5 +LS or MIL-L-2105D+LS - SAE 90 LS ¹) SAE 85W-90LS SAE 80W-90LS Planet Gear:
2 x 0.9 Differential: 4.3 Rear Axle Gear Oil GO GO 90 LS API-GL5 +LS or MIL-L-2105D+LS - SAE 90 LS ¹) SAE 85W-90LS SAE 80W-90LS Planet Gear: 2 x 0.9 Differential: 4.7 Hydraulic System, Steering Hydraulic Oil HYD HYD 0530 HYD 1030 HYD 1540 HVLP HVLP D 15° to 20° C -20° to 30° C -15° to 45° C ISO VG 46 ¹) ISO VG 68 ISO VG 100 95 or Engine Oil EO EO 1540 A EO 1030 A NRS CCMC D4 or, if not available: API CE or API CF -4²) -15° to 45° C -20° to 30° C -15° to 20° C SAE 15W-40 ¹) SAE 10W-30 SAE 05W-30 or Hydraulic Oil BIO-E-HYD BIO-E-HYD 0530 HEES (acc.
to VDMA fluid technology) -15° to 20° C ISO VG 46 Service Brake Automatic Transmis- sion Gear Oil ATF ATF, Type A, Suffix A - - 0.6 Cooling System Long-Time Coolant SP-C Antifreeze and Corrosion Protection Proportion of Mixture: 50% Coolant: 50% Water Min. Freeze Proofing:
-34° C 12.25 Fuel Tank Diesel Fuel³) CFPP Class B CFPP Class D CFPP Class E CFPP Class F DIN-EN 590 up to 0°C up to -10°C up to -15°C up to -20°C 90 Grease Nipple Lithiumsoap-Based Multi-Purpose Grease MPG-A KP2N-20 - NLGI 2 Air conditioning Coolant Refrigerating machine oil NRS NRS R134a (CFC-free) PAG (Polyalkyleneglycol) 1200 g 180 cm³ The specified filling volumes represent approximate values; the testing devices are binding. The selection of a viscosity class depends on the ambient temperature prevailing over a longer period of time. The temperature limits are to be regarded as guiding values; for a brief period, the actual temperature may be higher or lower than these guiding values.
¹)Factory filling ²) If engine oil of either the API CE or the API CF - 4 specification is not available, engine oil of either the API CC or the API CD specification may be used. In these cases, the oil change intervals must be cut in halves. ³) If fuels with a sulphur content between 0.5 and 1.0 % are used, the oil change intervals for the engine must be cut in halves; if the sulphur content exceeds 1.0 %, the oil change inter- vals must be quartered. *) BI-codes are the "standard lubricants" (Regelschmierstoffe) for construction machinery and vehicles of the Hauptverband der Deutschen Bauindustrie e.V. (BI) (head association of the German construction industry).
The brochure "Regelschmierstoffe für Baumaschinen- und Fahrzeuge" (standard lubricants for construction machinery and vehicles" can be obtained from bookstores or the German Bauverlag GmbH Wiesbaden und Berlin under the ISBN-No. 3-7625-3102-1.