K ENWORTH T680 MIRRORS - SERVICE MANUAL 1. MIRROR SYSTEM Precautions: When removing and installing the mirror system from/to the truck’s door, make sure the mirror is properly supported to avoid damage to the mirror system, truck and personal injury. Removal: 1. With the mirror system in its nominal position, remove the four bolts that secure the mirror system to the truck. 2. Carefully disconnect the truck’s connector from the old/damaged mirror system. Installation: 1. Before inserting the truck’s connector into the replacement mirror connector, inspect the truck’s connector for any damage (defects, corrosion, etc…).
If truck connector appears to be okay, then insert the truck’s connector into the mirror system’s connector; if not then refer to the truck service manual for replacement. 2. Place the new mirror system against the truck’s and secure it to the panel by fastening the four bolts to the specified torque value as specified in the truck service manual. Copyright © Lang Mekra North America 2014 Page 4 of 28 Revised: 03/2014