K ENWORTH T680 MIRRORS - SERVICE MANUAL 2.2. MAIN MIRROR GLASS The flat mirror glass has the option of being removed with or without having the convex mirror removed. However, removal of the convex first will provide additional hand clearance to lift up on the flat glass during removal. 1 2 Tab Back view of main mirror glass carrier 3 5 4 Removal: 1. Push the main mirror glass inward at the top. 2. Insert hand from the bottom of glass and press tab down with fingers while pushing glass upwards to disengage tab. 3. Push the main mirror glass inward at the bottom. 4. Push the main mirror glass up approximately Ѕ” to disengage the tabs on the carrier plate from the actuator.
(See note below.) 5. The main mirror glass can now be removed from the actuator. 6. Disconnect the heating element wires from the heater foil terminals by pulling firmly on the wire connectors to completely free the main glass from the mirror assembly. Copyright © Lang Mekra North America 2014 Page 6 of 28 Revised: 03/2014