Chapter 2 N38143 The weight of the exhaust system should be supported by brackets and not carried by the bellows, as shown in (G). Bracket with link to allow movement due to expansion in the exhaust system (horizontal exhaust systems should be suspended from the deck head using similar brackets. Note: Rigid brackets should not be used Insulating lagging Rigid bracket to support the weight of the vertical exhaust system Heat blanket Twin stainless steel bellows fitted to avoid torsional load on bellows unit - it is strongly recommended that twin bellows are used. Turbocharger adaptor (except 415GM, 422GM, 700GM, 4GM, & 4.4GM) 90 o elbow Page 10