NOTE: _ When installing the camshaft sprocket, keep the timing chain as tense as possible on the exhaust side. _ Do not turn the crankshaft when installing the camshaft to avoid damage or improper valve timing. CAUTION: f. Remove the wire from the timing chain. LLL L L LLL L L LLL L L LLL L L LLL L L LLL L LLL 5. Install: timing chain tensioner New 6 MMM M M MMM M M MMM M M MMM M M MMM M M MMM M MMM a. Remove the timing chain tensioner cap bolt 1 , copper washer 2 and spring 3 . b. Release the timing chain tensioner one-way cam 4 and push the timing chain tensioner rod 5 all the way into the timing chain ten- sioner housing. c.
Install the timing chain tensioner and gasket 6 onto the cylinder. 3 2 1 New 4 NOTE: Install the gasket with its beaded side facing the timing chain tensioner end. 5 d. Install the spring and timing chain tensioner cap bolt. LLL L L LLL L L LLL L L LLL L L LLL L L LLL L LLL 6. Turn: crankshaft (several turns counterclockwise) 4 - 16 CYLINDER HEAD ENG T.R. Timing chain tensioner bolt 10 Nm (1.0 m · kg, 7.2 ft · lb) T.R. Timing chain tensioner cap bolt 20 Nm (2.0 m · kg, 14 ft · lb)