3. Fit the right crankcase onto the left crank- case. Tap lightly on the case with a soft hammer. CAUTION: _ Before installing and torquing the crank- case holding bolts, be sure to check whether the transmission is functioning properly by manually rotating the shift drum in both directions. И 4. Install: lead holder crankcase bolts 5. Tighten: crankcase bolts (follow the proper tightening sequence) И Right crankcase Й Left crankcase NOTE: Й _ Tighten the bolts in stages, using a crisscross pattern. 6. Apply: 4-stroke engine oil (to the crankshaft pin, bearing and oil deliv- ery hole) 7. Check: crankshaft and transmission operation Unsmooth operation Repair. INSTALLING THE SHIFT LEVER 1.
Install: shift lever 2 assembly 1 shift lever 1 2 NOTE: When installing the shift lever 1, align the punch mark a on the shift lever 1 with the punch marks b on the shift lever 2. 4 - 74 CRANKCASE ENG T.R. 10 Nm (1.0 m · kg, 7.2 ft · lb) T.R. 14 Nm (1.4 m · kg, 10 ft · lb)