EBS00356 INSTALLING THE TRANSMISSION 1. Install: stopper lever shaft stopper lever reverse idle gear 1 drive axle assembly 2 secondary shaft 3 shift fork assembly 4 shift drum 5 3 2 4 5 1 NOTE: _ Install the shift forks 6 with the “L” mark a and “R” mark b facing towards the left and right sides of the crankcase respectively. a 6 b 2. Check: shift operation Unsmooth operation Repair. NOTE: _ Oil each gear and bearing thoroughly. Before assembling the crankcase, make sure that the transmission is in neutral and that the gears turn freely. 4 - 88 TRANSMISSION ENG