Yamaha Motor Co., Ltd. YFM7FGPW — FUEL TANK

REMOVING THE FUEL TANK 1. Extract the fuel in the fuel tank through the fuel tank cap with a pump. 2. Remove: fuel hose connector holder fuel hose CAUTION: Be sure to disconnect the fuel hose by hand. Do not forcefully disconnect the hose with tools. Although the fuel has been removed from the fuel tank be careful when removing the fuel hose, since there may be fuel remaining in it. NOTE: When removing the fuel hose from the fuel pump, remove the fuel hose connector holder first, and next, insert a slotted head screwdriver etc. in the slot part a of the fuel hose connector cover 1 , then slide it in the direction of the arrow, and remove the fuel hose.

To remove the fuel hose from the throttle body, slide the fuel hose connector cover 2 on the end of the hose in direction of the arrow shown, press the two buttons 3 on the sides of the connector, and then remove the hose. Before removing the hose, place a few rags in the area under where it will be removed. 3. Remove: fuel tank NOTE: Do not set the fuel tank down on the installa- tion surface of the fuel pump. Be sure to lean the fuel tank against a wall or like. REMOVING THE FUEL PUMP 1. Remove: fuel pump bracket fuel pump fuel pump gasket 6 - 30 FUEL TANK FI FI