EBS00389 CHECKING THE BRAKE DISCS 1. Check: brake discs Galling/damage Replace. 2. Measure: brake disc deflection Out of specification Check the wheel runout. Brake disc maximum deflection Front: 0.1 mm (0.004 in) Rear: 0.1 mm (0.004 in) brake disc thickness a Out of specification Replace. Brake disc minimum thickness Front: 3.0 mm (0.12 in) Rear: 3.0 mm (0.12 in) INSTALLING THE BRAKE DISCS 1. Install: brake discs Brake disc bolt 30 Nm (3.0 m · kg, 22 ft · lb) LOCTITE ® T R . . NOTE: Install the brake discs with their spot-faced side facing the bolt heads. INSTALLING THE WHEEL HUBS 1. Install: wheel axle nut New NOTE: Do not apply oil to the seat of the nut.
After tightening the nut, stake the collar of the nut into the notch of the shaft. 8 - 6 FRONT AND REAR WHEELS CHAS CHAS T.R. 260 Nm (26.0 m · kg, 190 ft · lb)