2 - 10 ENGINE SPECIFICATIONS SPEC Item Standard Limit Fuel pump Pump type Model/manufacturer Electrical 3B4/DENSO ---- ---- Oil filter type Cartridge (paper) ---- Oil pump Oil pump type Inner-rotor-to-outer-rotor-tip clear- ance Outer-rotor-to-oil-pump-housing clearance Oil-pump-housing-to-inner-and- outer-rotor clearance Oil pressure (hot) Pressure check location Trochoid Less than 0.12 mm (0.0047 in) 0.090 ~ 0.170 mm (0.0035 ~ 0.0067 in) 0.03 ~ 0.10 mm (0.0012 ~ 0.0039 in) 50.0 kPa at 1,600 r/min (0.50 kg/cm2 at 1,600 r/min, 7.1 psi at 1,600 r/min) Cylinder head ---- 0.20 mm (0.0079 in) 0.24 mm (0.0094 in) 0.17 mm (0.0067 in) ---- ---- Cooling system Radiator core Width Height Depth Radiator cap opening pressure Coolant reservoir capacity Up to the maximum level mark From low to full level 340.0 mm (13.39 in) 248.2 mm (9.77 in) 22.0 mm (0.87 in) 93.3 ~ 122.7 kPa (0.933 ~ 1.227 kg/cm2, 13.27 ~ 17.45 psi) 0.17 L (0.15 Imp qt, 0.18 US qt) 0.14 L (0.12 Imp qt, 0.15 US qt) ---- ---- ---- ---- ---- ---- Water pump Water pump type Reduction ratio Single-suction centrifugal pump 32/31 (1.032) ---- ---- Shaft drive Middle gear backlash Final gear backlash Differential gear backlash 0.10 ~ 0.30 mm (0.004 ~ 0.012 in) 0.10 ~ 0.20 mm (0.0039 ~ 0.0079 in) 0.05 ~ 0.25 mm (0.0020 ~ 0.0098 in) ---- ---- ----