EBS00402 CAUTION: _ Disc brake components rarely require dis- assembly. DO NOT: disassemble components unless abso- lutely necessary; use solvents on internal brake compo- nents; use spent brake fluid for cleaning; (use only clean brake fluid) allow brake fluid to come in contact with the eyes, as this may cause eye injury; splash brake fluid onto painted surfaces or plastic parts, as this may cause dam- age; disconnect any hydraulic connection, as this would require the entire brake sys- tem to be disassembled, drained, cleaned, properly filled and bled after reassembly. EBS00404 REPLACING THE FRONT AND REAR BRAKE PADS NOTE:
_ It is not necessary to disassemble the brake calipers and brake hoses to replace the brake pads. a 1. Remove: brake pads Brake pad wear limit a Front: 1.0 mm (0.04 in) Rear: 1.0 mm (0.04 in) NOTE: _ Replace the brake pads as a set if either is found to be worn to the wear limit. 8 - 10 FRONT AND REAR BRAKES CHAS CHAS