EBS00507 STARTING CIRCUIT OPERATION The starting circuit on this model consists of the starter motor, starter relay, starting circuit cut-off relay, rear brake light switch, rear brake relay and gear position switch. If the main switch is on and the engine stop switch is in the RUN position, the starter motor can be operated only if: E 1 D 2 C The transmission is in neutral (the neutral switch circuit of the gear position switch is closed). or The transmission is in park (the park switch circuit of the gear position switch is closed). or You pull in the rear brake lever or push down on the brake pedal (the rear brake light switch circuit is closed).
6 4 A B 7 5 The starting circuit cut-off relay prevents the starter from operating when the select lever is in gear or in reverse and the rear brake lever and brake pedal is free. In this instance, the starting circuit cut-off relay is off so that current cannot reach the starter motor. 1 Battery 2 Main fuse 3 Main switch 4 Ignition fuse 5 Engine stop switch 6 Signaling system fuse 7 Rear brake light switch 8 Rear brake relay 9 Diode 2 0 Gear position switch A Starting circuit cut-off relay B Start switch C Diode 1 D Starter relay E Starter motor 8 9 0 9 - 17 ELECTRIC STARTING SYSTEM ELEC – + ELEC – + 3