И Face the end of the coolant reservoir breather hose downward. Й Route the ground lead, radiator fan motor breather hose, differential gear case breather hose, and EPS motor breather hose to the inside of the fast idle plunger outlet hose. К Pass the radiator fan motor breather hose through the larger diameter guide. Л Route the coolant reservoir breather hose to the outside of the fast idle plunger outlet hose. М Route the fuel injector lead under the fuel hose. Н Fasten the radiator outlet hose to the frame with the plastic band, making sure to face the end of the band inward. О Route the EPS motor breather hose under the coolant reservoir hose.
П Place the EPS torque sensor lead and differen- tial gear motor lead in the holder, and then insert the ends of the holder into the hole in the stay on the frame. Р Route the differential gear case breather hose to the inside of the frame. К Л 2 3 5 6 7 4 И Й 1 E У B A 8 М D C Т A B D C 9 С C 0 Р E A E B D 5 П О Н Ф F C 1 A-A 1 4 4 Ц G B-B C-C F Ч Ш Х Х 0 A J A Ш 9 Щ H E-E D 5 I Ъ 2 - 34 CABLE R SPEC OUTING