. SAFETY PRECAUTIONS FOR OPERATION 2 - 24 STARTING WITH BOO STER CABLES ade in the method of connecting the booster se the battery to explode, so always do as ety goggles and rubber gloves when starting ooster cable. g a normal machine to a failed machine with If any mistake is m cables, it may cau follows. Always wear saf the engine with b When connectin booster cables, always use a normal machin s the failed machine. with a booster cable, perfo e with the same rm the starting battery voltage a When starting operation with 2 workers (1 worker sitting in th e operator's seat and the other wo rking with the battery). om another machine, do not allow the nomal ed machine.
When starting fr machine and fail When connecting the booster cables, turn the starting switch to OFF position for both the normal machine and failed machine. There is a hazard that the machine will move w hen the power is connected. Be sure to conne ct the positive (+) cable first w hen installing the booster cables. D isconnect the negative (-) ca ble (ground side) first when removi ng them. the booster cables, be careful not to let the When removing booster cable clip s touch each other or to let th e clips touch the machine. For details of the starting procedure when usin g booster cables, see "STARTING ENGINE WITH BOOSTER CABLE (PAGE 3-135)" in the OP ERATION section.