SAFETY 7. Be sure the pin (3) drops down completely and is flush with the top of the backhoe boss. After installing the lock pin (3), the backhoe assembly will not swing. 8. Lock the backhoe wobble stick controllers (4) using the locking lever (5). 9. Move the wobble sticks (4) to be sure they are locked. 10. If traveling or using the front end loader for a long period of time, lock the outriggers in place to avoid possible hydraulic drift. A. Unlock the lever (5) to raise the outriggers. B. Retract both outriggers completely. C. Install the locking safety cables (6) on both outriggers and be sure to relock the wobble stick lock (5).
Remark The lock pin and the safety cables must remain with the machine. If they are lost or damaged, replace them. 1-24 WB140PS-2N WB150PS-2N