(16) Tighten cover (12) and housing (1) with 12 mm hexagonal socket bolt (18). · Tightening torque : 16 kgf · m (116 lbf · ft ) (17) (17) Make up valve Make up valve Assemble check (35) and spring (36) to cover (12) and tighten plug (37) with 14 mm hexagonal socket bolt. · Tightening torque : 14 kgf · m (101 lbf · ft ) (18) (18) Relief assembly Relief assembly Assemble relief valve assembly (17) to cover (12) with 14 mm hexagonal socket bolt. · Tightening torque : 8 kgf · m (58 lbf · ft ) Be cautious of assembling method. Check of assembly Check of assembly Load pilot pressure of 20 kgf / cm 2 to brake release port after opening inlet and outlet port.
Check if output shaft is rotated smoothly around torque of 0.5~1 kgf · m . If not rotated, disassemble and check. (19) (19) This completes assembly. 7-20