(4) (4) Fuel level gauge Fuel level gauge ① ② This gauge indicates the amount of fuel in the fuel tank. Fill the fuel when the red range, or lamp lights ON in red. If the gauge indicates the red range or If the gauge indicates the red range or lamp lights ON in lamp lights ON in red even though the machine is on the normal condition, check red even though the machine is on the normal condition, check the electric device as that can be caused by the poor the electric device as that can be caused by the poor connection of electricity or sensor. connection of electricity or sensor. Engine rpm display Engine rpm display (5) (5) ① This displays the engine speed.
Accel dial display Accel dial display (6) (6) This displays acceleration dial level from 0 to 10 step. ① COMMUNICATION ERROR AND LOW VOLTAGE WARNING POP-UP COMMUNICATION ERROR AND LOW VOLTAGE WARNING POP-UP 3) 3) Communication error pop-up Communication error pop-up (1) (1) ① Cluster displays this communication error pop-up when it has communication error with MCU. Communication error pop-up displays at operation screen only. Just buzzer alarm at the other screen. If communication with MCU become normal state, it will disappear automatically. ② ③ Low voltage warning pop-up Low voltage warning pop-up (2) (2) ① Cluster displays this low voltage warning pop-up when the battery voltage is low.
Low voltage warning pop-up displays at operation screen only. Just buzzer alarm at the other screen. This pop-up will disappear with using touch screen or buzzer stop switch. While the battery voltage is low, buzzer sounds every minute. When the battery voltage is higher than 11.5 V, the pop-up off. ② ③ ④ 4-5