(3) (3) Management Management ① ESL mode setting ESL mode setting · - - ESL mode setting ESL mode setting ESL : Engine Starting Limit ESL mode is desingned to be a theft deterrent or will prevent the unauthorized operation of the machine. If the ESL mode was selected Enable, the password will be required when the start switch is turned ON. Disable Disable : Not used ESL function Enable (always) Enable (always) : The password is required whenever the operator starts engine. Enable (Interval) Enable (Interval) : The password is required when the operator starts engine fi rst. But the operator can restart the engine within the interval time without in- putting the password.
The interval time can be set maximum 2 days. Default password : 00000 Default password : 00000 Password length : 5~10 digit Password length : 5~10 digit - - ② Change password Change password The password is 5~10 digits. - Enter the current password Enter the new password Enter the new password again The new password is stored in the MCU. 4-17