11. EXPLANATION OF COMPONENTS 2. TRANSMISSION CUT-OFF SWITCH WARNING If the machine has to be started on a slope, always turn the transmission cut-off switch to OFF and depress the left brake pedal. Then depress the accelerator pedal while releasing the left brake pedal to start the machine off slowly. Normally, put this switch in ON position. Position 1 (OFF): Acts as normal brake (like right brake pedal). Position 2 (ON): Acts as normal brake, but also switches trans- mission to NEUTRAL. If the switch is at ON, the transmission cut-off pilot lamp will light up. w q AE070340 3. WORKING LAMP SWITCH w q WARNING Always turn the working lamp off before traveling on public roads.
When the front and rear working lamps are turned ON, the pilot lamp lights up. Position 1 : OFF Position 2 : Lights up AE070350 4. LAMP SWITCH This is used to light up the head lamps, side clearance lamps, tail lamps, and instrument panel lighting. 1 OFF 2 g position:Side clearance lamp, tail lamps, and gauge light- ing light up 3 b position: Head lamps light up in addition to lamps at g position AE061190 REMARK The lamp switch can be operated regardless of the position of the lever. 2-11