11. EXPLANATION OF COMPONENTS 7. KICKDOWN SWITCH When the speed control lever is in 2nd, and the switch is pressed, the gear will shift down to 1st. This switch is used to increase the drawbar pull in digging operations. REMARK To cancel the kickdown switch, move the directional lever to REVERSE or NEUTRAL, or move the speed control lever to any position except 2nd. It is also possible to cancel the kickdown switch by operating the parking brake switch or by turning the starting switch OFF. 8. TRANSMISSION AUTO SHIFT/MANUAL SELECTOR SWITCH Setting this switch to the “I” position places the transmission in the auto-shift mode and the auto-shift/manual-shift pilot lamp stays off.
Setting this switch to the “O” position places the transmission in the manual shift mode and the auto-shift/manual-shift pilot lamp lights up. 2-13