e ty Safety - Section 2 Page 2-13 W c n o AT ess d ra sen E ar di t R LEVEL y to add water to the radiator, stop the engine and allow the ator to cool down before adding the water. he cap to relieve pressure before removing the cap. l, oil, coolant, or battery electrolyte, always use lighting specifications. If such lighting equipment is not used, xplosion. l, oil, coolant, or battery electrolyte, always use lighting specifications. If such lighting equipment is not used, xplosion. USE OF LIG When check with anti-ex there is dan HTIN ing f plosio ger or HTIN ng f osio er or G ue n e l, oil, coolant, or battery electrolyte, always use lighting specifications.
If such lighting equipment is not used, xplosion. PRECAUTIONS WITH BATTERY • When repairing the electrical system or when carrying out electrical welding, remove the negative (-) terminal of the battery to stop the flow of current. HANDLING HIGH-PRESSURE HOSES • Do not bend high-pressure hoses or hit them with hard objects. Do not use any bent or cra hoses. They may burst during use. • Always repair any loose or broken fuel hoses or oil hoses. If fuel or oil leaks, it may cause PRECAUTIONS WITH HIGH PRESSURE OIL • Do not forget that the work equipment circuits are always under pressure. • Do not add oil, drain oil, or carry out maintenance or inspection before completely re pressure.
• If oil is leaking under high pressure from small holes, it is dangerous if the jet of high-press or enters your eyes. Always wear safety glasses and thick gloves, and use a piece of car wood to check for oil leakage. • If you are hit by a jet of high-pressure oil, consult a doctor immediately for medical attentio ck a le u d n. ed piping, tube fire. asing the inte re oil hits your board or a she s r s et HANDLING HIGH-PRESSURE HOSES • Do not bend high-pressure hoses or hit them with h hoses. They may burst during use.
• Always repair any loose or broken fuel hoses or oil PRECAUTIONS WITH HIGH PRESSURE OIL • Do not forget that the work equipment circuits are a • Do not add oil, drain oil, or carry out maintenan pressure. • If oil is leaking under high pressure from small hole or enters your eyes. Always wear safety glasses a wood to check for oil leakage. • If you are hit by a jet of high-pressure oil, consult a HANDLING HIGH-PRESSURE HOSES • Do not bend high-pressure hoses or hit them with hoses. They may burst during use.
• Always repair any loose or broken fuel hoses or o PRECAUTIONS WITH HIGH PRESSURE OIL • Do not forget that the work equipment circuits are • Do not add oil, drain oil, or carry out mainten pressure. • If oil is leaking under high pressure from small ho or enters your eyes. Always wear safety glasses wood to check for oil leakage. • If you are hit by a jet of high-pressure oil, consult