SAFETY SAFETY INFORMATION ATTACHMENT COMBINATIONS Depending on the type or combination of work equipment, there is a hazard that the work equipment may hit the cab or other parts of the machine. Before using unfamiliar work equipment, check if there is any hazard of interfer- ence, and operate with caution. CAB WIDOW GLASSES If the cab glass on the work equipment side is broken, there is a hazard that the work equipment may contact the operator's body directly. Stop operation immediately and replace the glass. UNAUTHORIZED MODIFICATIONS Any modification mode without authorization from Komatsu can create hazards. Before making a modification, consult your Komatsu distributor.
G Komatsu will not be responsible for any injuries, accidents, or product failures resulting from modifications made without authorization from Komatsu. SAFETY AT JOBSITE Before starting operations, thoroughly check the area for any unusual conditions that could be dangerous. G When carrying out operations near combustable materials such as thatched roofs, dry leaves or dry grass, there is a hazard of fire, so be careful when operating. G Check the terrain and condition of the ground at the worksite, and determine the safest method of operation. Do not carry out operations at places where there is a hazard of landslides or falling rocks.
G If water lines, gas lines, or high-voltage electrical lines may be buried under the worksite, contact each utility and iden- tify their locations. Be careful not to sever or damage any of these lines. G Take necessary measures to prevent any unauthorized person from entering the operating area. G When traveling or operating in shallow water or on soft ground, check the shape and condition of the bedrock, and the depth and speed of flow of the water before starting operations. WORKING ON LOOSE GROUND G Avoid traveling or operating your machine too close to the edge of cliffs, overhangs, and deep ditches. The ground may be weak in such areas.
If the ground should collapse under the weight or vibration of the machine, there is a hazard that the machine may fall or tip over. Remember that the soil after heavy rain or blasting or after earthquakes is weak in these areas. G When working on embankments or near excavated ditches, there is a hazard that the weight and vibration of the machine will cause the soil to collapse. Before starting operations, take steps to ensure that the ground is safe and to prevent the machine from rolling over or falling. 2-17