SAFETY MACHINE OPERATION SAFETY OPERATION CHECKS AFTER STARTING ENGINE When carrying out the checks, move the machine to a wide area where there are no obstructions, and operate slowly. Do not allow anyone near the machine. G Always fasten your seat belt. G Check that the movement of the machine matches the display on the control pattern card. If it does not match, replace it immediately with the correct control pattern card. G Check the operation of the gauges and equipment, and check the operation of the bucket, arm, boom, travel system, swing system, and steering system.
G Check for any abnormality in the sound of the machine, vibration, heat, smell, or gauges; check also that there is no leakage of oil or fuel. G If any abnormality is found, carry out repairs immediately. SAFETY RULES FOR CHANGING MACHINE DIRECTIONS G Position the upper structure so that the sprocket is at the rear of the operator's cab before traveling. If the sprocket is at the front of the operator's cab, the direction of operations is reversed (for example, forward becomes reverse, and left becomes right). G Before travelling, check again that there is no one in the surrounding area, and that there are no obstacles. G Before travelling, sound the horn to warn people in the area.
G Always operate the machine only when seated. G Do not allow anyone apart from the operator to ride on the machine. G Check that the travel alarm (if equipped) works properly. G Always lock the door and windows of the operator's com- partment in position (open or closed). On jobsites where there is a hazard of flying objects or of objects entering the operator's compartment, check that the door and windows are securely closed. G If there is an area to the rear of the machine which cannot be seen, position a signal person. Take special care not to hit other machines or people when turning or swinging the machine.
Always be sure to carry out the above precautions even when the machine is equipped with mirrors. A0067200 2-22