OPERATION EXPLANATION OF COMPONENTS TRAVELING ACCELERATOR PEDAL If the pedal (6) is depressed, the machine speed will increase. 3.2km/h (2.0MPH) to 5.1km/h (3.2MPH) (when engine is at full throttle) REMARK This pedal functions only when the travel speed selector switch is in LOW position. When the travel speed selector switch is at the HIGH position, the travel speed is automatically switched, so the machine speed will not change even if the pedal is depressed. CEILING WINDOW When leaving the operator's compartment, set the safety lock lever securely to the LOCK position. If the control levers are not locked, and they are touched by mistake, this may lead to a serious accident.
When opening 1. Lock the safety lock lever securely. 2. Check for any ceiling window movement by pulling lock knob (2) located on front side, then push up and open the ceiling window grasping grip (1). When closing Close the ceiling window grasping grip (1) and lock it with lock knob (2). If the lock cannot be applied, open and close the ceil- ing window again. 3-19 WARNING