OPERATION EXPLANATION OF COMPONENTS CAP, COVER WITH LOCK There are locks fitted to the fuel tank filler port, operator’s cab, engine hood, door in front of the tool box, pump room door (right side of machine), inspection window at the front right of the machine, cover at the rear of the cab, and the battery room door (left side of machine). Use the starting switch key to lock or unlock the caps and covers. Insert the key as far as it will go, then turn it. If the key is turned before it is inserted fully, it may break. METHOD OF OPENING AND CLOSING CAP WITH LOCK To open the cap (For the fuel tank filler port) 1. Insert the key into the cap. Insert the key as far as it will go.
If the key is turned before it is inserted all the way, it may break. 2. Turn the key clockwise, align the match mark on the cap with the rotor groove, then remove the cap. To lock the cap 1. Turn the cap into place. 2. Turn the key counterclockwise and take the key out. METHOD OF OPENING AND CLOSING COVER WITH LOCK To open the cover (locked cover) 1. Insert the key into the key slot. 2. Turn the key counterclockwise and open the cover by pulling the cover grip. To lock the cover 1. Close the cover and insert the key into the key slot. 2. Turn the key clockwise and take the key out. 3-25