18 SEBU7901-01 Product Information Section Model Views g01244139 Illustration 15 Right side view of C11 and C13 industrial engine (1) Oil pressure connection and location for oil sampling (2) Lifting eye (3) Jacket water heater (4) Air inlet (5) Air outlet to aftercooler (6) Water inlet (7) Heater inlet for lubrication (8) Oil drain (9) Mounting block for an oil filter bypass (10) Oil filter i02094174 Engine Description Table 2 SMCS Code: 1000 Table 1 The electronic engines that are covered by this manual have the following characteristics: direct fuel injection, electronic unit injection that is mechanically actuated, turbocharged, and air-to-air aftercooled (ATAAC).
The electronic engine control system provides the following functions: electronic governing, automatic air to fuel ratio control, torque rise shaping, injection timing control, and system diagnostics. C13 Engine Specifications Cylinders and Arrangement In-line six cylinder Bore 130 mm (5.2 inch) Stroke 157 mm (6.2 inch) Displacement 12.5 L (763 in3) Firing Order 1-5-3-6-2-4 Rotation (flywheel end) Counterclockwise C11 Engine Specifications Cylinders and Arrangement In-line six cylinder Bore 130 mm (5.2 inch) Stroke 140 mm (5.5 inch) Displacement 11.1 L (677 in3) Firing Order 1-5-3-6-2-4 Rotation (flywheel end) Counterclockwise