22 SEBU7901-01 Product Information Section Product Identification Information i00844066 Emissions Certification Film Engine Parameters Top Engine Limit (TEL) at 100 percent load (If Applicable) _______________________________________________ SMCS Code:
1000; 7405 Torque Limit ______________________________________________ High Idle (If Applicable) ________________________________ Low Idle ___________________________________________________ Intermediate Speed ____________________________________ g00284658 Illustration 17 Engine Monitoring Mode EPA Emissions Certification Film ______________________________________________________ “Warning” _________________________________________________ “Warning/Derate” ________________________________________ “Warning/Derate/Shutdown” __________________________ “Coolant Level Sensor Enable/Disable” ____________ “Fuel Pressure Sensor Enable/Disable” ___________ “Inlet Manifold Air Temperature Sensor Enable/Disable” _________________________________________ g00415538 Illustration 18 Equipment ID European Emissions Certification Film Maintenance Indicator The EPA Emissions Certification Film (if equipped) and/or the European Emissions Certification Film (if equipped) is located on the side of the engine.
Manual-Hours Auto-Hours i02238153 Customer Specified Parameters Manual-Fuel Auto-Fuel Auxiliary Pressure SMCS Code: 1000 High Warning Set Point ________________________________ To record programmed specifications, use the following blanks. Auxiliary Temperature Customer Passwords High Warning Set Point ________________________________ First Password ___________________________________________ Second Password ______________________________________ Power Rating (hp at rpm) ______________________________ Rating Selection (A-E) __________________________________ PTO Governor Parameters PTO Engine Speed Ramp Rate __________ rpm/sec