Safety Cab Guarding For Special Uses Special work situations or machine attachments may expose the operator to intruding or flying objects. Using this machine in a forestry application or woods environment, or with attachments such as a winch, requires added guarding to protect the operator. Forestry protection packages or special screens should be installed when working in areas where logs or branches may strike the operator. A rear screen should always be used with a winch to protect against a snapping cable. Contact your authorized dealer for information on protective guarding before operating in any hazardous environment.
T139005 —UN—05MAR01 MB60223,000004F -19-02MAY08-1/1 Use Steps and Handholds Correctly Prevent falls by facing the machine when you get on and off. Maintain 3-point contact with steps and handrails. Never use machine controls as handholds. T133468 —UN—15APR13 Use extra care when mud, snow, or moisture present slippery conditions. Keep steps clean and free of grease or oil. Never jump when exiting machine. Never mount or dismount a moving machine. TX03679,00016F2 -19-12FEB07-1/1 Start Only From Operator's Seat Avoid unexpected machine movement. Start engine only while sitting in operator's seat. Ensure all controls and working tools are in proper position for a parked machine.
T133715 —UN—15APR13 Never attempt to start engine from the ground. Do not attempt to start engine by shorting across the starter solenoid terminals. TX03679,0001799 -19-22APR10-1/1 Use and Maintain Seat Belt Use seat belt when operating machine . Remember to fasten seat belt when loading and unloading from trucks and during other uses. T133716 —19—17APR13 Examine seat belt frequently. Be sure webbing is not cut or torn. Replace seat belt immediately if any part is damaged or does not function properly. The complete seat belt assembly should be replaced every three years, regardless of appearance. TX03679,00016DD -19-19MAR07-1/1 TM10779 (03MAY19) 9000-01-6 850JR MCT Crawler Dozer 050319 PN=12