Safety Make Welding Repairs Safely IMPORTANT: Disable electrical power before welding. Turn off main battery switch or disconnect positive battery cable. Separate harness connectors to engine and vehicle microprocessors. T133547 —UN—15APR13 Avoid welding or heating near pressurized fluid lines. Flammable spray may result and cause severe burns if pressurized lines fail as a result of heating. Do not let heat go beyond work area to nearby pressurized lines. Remove paint properly. Do not inhale paint dust or fumes. Use a qualified welding technician for structural repairs. Make sure there is good ventilation. Wear eye protection and protective equipment when welding.
TX03679,00016D5 -19-11SEP09-1/1 Drive Metal Pins Safely Always wear protective goggles or safety glasses and other protective equipment before striking hardened parts. Hammering hardened metal parts such as pins and bucket teeth may dislodge chips at high velocity. T133738 —UN—15APR13 Use a soft hammer or a brass bar between hammer and object to prevent chipping. Hardened Metal Parts OUO1065,0000090 -19-06JAN16-1/1 TM10779 (03MAY19) 9000-01-11 850JR MCT Crawler Dozer 050319 PN=17