5-101.bk Page 30 Friday, March 17, 2006 11:05 AM [212 HP] CRANKSHAFT [219 RV] PISTON COOLING SPRAY NOZZLE Refer to Figure 4-37. 1. Using a suitable lifting device, secure a sling or crankshaft support tool around the crankshaft and lifting device hook. Ensure crankshaft is evenly balanced when lifted from the engine block. To avoid damaging spray nozzles, remove them before removing sleeves. 2. Lift crankshaft from engine block and store in a secured stand, or horizontally on V-blocks. It is best to use a 10-mm, 6-point socket on a 12-inch extension to remove the nozzle retaining capscrews. Refer to Figure 4-38. 1. Remove piston cooling spray nozzle (2) by removing retaining capscrew (3). 2.
Carefully pull outward on the spray nozzle to remove it from the block. 3. Remove and discard elastomer seal (1). 4. Repeat steps 1 through 3 to remove remaining spray nozzles. 1 2 3 Figure 4-37 — Crankshaft Removal 200613a Figure 4-38 — Spray Nozzle Removal Page 4-30 200 ENGINE DISASSEMBLY 1. Elastomer seal 3. C 2. Spray nozzle apscrew