Safety 2.1. General safety measures 2.1.4. Clothing and personal protection Do not wear loose-fitting clothing, jewellery, or open long hair. There is danger that you get caught by control elements or moving parts, leading to serious injuries. Immediately replace clothing stained with highly inflammable substances. When operating and servicing the machine, wear the appro- priate protective equipment, e.g. safety helmet, safety gog- gles, safety shoes, dust protection mask, and safety gloves. Always wear safety goggles, safety helmet, and protective clothing, if it is likely that chippings or splinters will be pro- duced while operating the machine (e.g.
when removing or driving in bolts or cleaning with compressed air). A0055010 Ensure that no unauthorised person is within the danger zone. 2.1.5. Machine modifications Komatsu will not be liable for modifications performed without prior expressed consent by the manufacturer. Komatsu will not be liable for any injuries or damage resulting from unapproved modifications. 2.1.6. Before you leave the driver’s seat 1. Lower the work unit onto the ground. 2. Use the safety lever to secure the work hydraulic system against unintentional operation (lever position ’1’).
If the lever for the hydraulic system is not secured and accidentally touched, uncontrolled movements of the work unit may lead to accidents with injuries or damage. 2 3. Switch off the engine. 1 4. Remove the ignition key before you leave the driver’s seat. Store the ignition key in a safe place. 5. Close the cabin door. 2-3