G3 — G3. Control devices.indd (EN)

Steering warning lamp Steering warning lamp (9) (9) ① Primary Primary This lamp indicates that the primary steering has failed. When the indicator comes on and the action alarm sounds, steer the machine immediately to a convenient location and stop the machine. Stop the engine and investigate the cause. Do not operate the machine until the cause has been cor- Do not operate the machine until the cause has been cor- rected. rected. 77073CD66 ② Emergency Emergency This lamp indicates the emergency steering system is active. Immediately pull the machine to a convenient stop and stop Immediately pull the machine to a convenient stop and stop the engine. the engine.

The emergency steering system can be manually tested. The emergency steering system can be manually tested. Refer to page 7-46. Refer to page 7-46. 77073CD15 Battery charging warning lamp Battery charging warning lamp (10) (10) ① This lamp is ON when key ON, it is turned OFF after starting the engine. ② Check the battery charging circuit when this lamp comes ON, during engine operation. 77073CD22 Brake fail warning lamp Brake fail warning lamp (11) (11) ① The lamp lights ON when the oil pressure of service brake drops below the normal range. ② When the lamp is ON, stop the engine and check for its cause. Do not operate until any problems are corrected.

Do not operate until any problems are corrected. 77073CD16 7-25