EPA07/10 DD PLATFORM WORKSHOP MANUAL - ENGINE [b] Remove the bolts securing the two-piece fuel injector electrical harness (1 and 3) and remove the harness from the camshaft housing housing. 14. Remove the engine brake solenoids from the camshaft housing. NOTICE: Ensure when loosening the rocker shaft bolts that the bolts are loosened from the inside bolts outward in 1/2 turn increments. The increment procedure needs to be followed to prevent the rocker shaft from breaking. 15. Completely loosen all of the adjusting screws on all of the rocker arms. 16. Loosen the seven bolts securing the intake rocker shaft to the camshaft bearing caps. NOTICE:
Make sure that the camshaft housing housing is not damaged during removal of the intake/exhaust rocker shaft assemblies. All information subject to change without notice. DDC-SVC-MAN-0081 2010 Copyright © 2010 DETROIT DIESEL CORPORATION 2-11