32 GETTING TO KNOW YOUR VEHICLE P ROGRAMMING T HE M EMORY F EATURE L INKING A ND U NLINKING T HE K EY F OB T O M EMORY NOTE: Your key fob can be unlinked from your memory settings by pushing the set (S) button, followed by pushing the unlock button on the key fob within 10 seconds. M EMORY P OSITION R ECALL To create a new memory profile, perform the following: NOTE: Saving a new memory profile will erase the selected profile from memory. 1. Place the vehicle’s ignition in the ON/RUN position (do not start the engine). Your key fob can be programmed to recall one of two saved memory profiles. NOTE:
Before programming your key fob you must select the “Personal Settings Linked to Key Fob” feature through the Uconnect system Ъ page216. To program your key fob, perform the following: NOTE: If a recall is attempted when the vehicle is not in PARK, a message will display in the instrument cluster display. To recall the memory settings for driver one or two, push the desired memory button number (1 or 2) or the unlock button on the key fob linked to the desired memory position. 2. Adjust all memory profile settings to desired preferences (i.e., driver’s seat, outside mirrors, adjustable pedals (if equipped), and radio station presets). 1. Place the vehicle’s ignition in the OFF position. 3.
Push the set (S) button on the memory switch, and then push the desired memory button (1 or 2) within five seconds. The instrument cluster display will display which memory position has been set. 2. Select a desired memory profile 1 or 2. 3. Once the profile has been recalled, push and release the set (S) button on the memory switch. A recall can be canceled by pushing any of the memory buttons (S, 1, or 2) during a recall. When a recall is canceled, the driver seat will stop moving. A delay of one second will occur before another recall can be selected. 4. Push and release button (1) or (2) accordingly. “Memory Profile Set” (1 or 2) will display in the instrument cluster. NOTE:
Memory profiles can be set without the vehicle in PARK, but the vehicle must be in PARK to recall a memory profile. 5. Push and release the lock button on the key fob within 10 seconds.