GETTING TO KNOW YOUR VEHICLE 59 Bi-Level Mode M ANUAL C LIMATE C ONTROL D ESCRIPTIONS A ND F UNCTIONS A/C Button Air comes from the instrument panel outlets and floor outlets. A slight amount of air is directed through the defrost and side window demister outlets. Push the A/C button to engage the Air Conditioning (A/C). The A/C indicator illuminates when A/C is on. NOTE: NOTE: Bi-Level mode is designed under comfort condi tions to provide cooler air out of the panel outlets and warmer air from the floor outlets.
Floor Mode For Manual Climate Controls, if the system is in Mix, Floor or Defrost Mode, the A/C can be turned off, but the A/C system shall remain active to prevent fogging of the windows. 2 If fog or mist appears on the windshield or side glass, select Defrost mode, and increase blower speed if needed. Air comes from the floor outlets. A slight amount of air is directed through the defrost and side window demister outlets. Mix Mode Uconnect 3 With 5-inch Display Manual Temperature Controls If your air conditioning performance seems lower than expected, check the front of the A/C condenser (located in front of the radiator), for an accumulation of dirt or insects.
Clean with a gentle water spray from the front of the radiator and through the condenser. Recirculation Button Air is directed through the floor, defrost, and side window demister outlets. This setting works best in cold or snowy conditions that require extra heat to the windshield. This setting is good for maintaining comfort while reducing moisture on the windshield. Climate Control OFF Button MAX A/C Setting Set the temperature control knob to the MAX A/C setting to change the current setting to the coldest output of air. Moving the temperature control knob away from the MAX A/C setting causes the MAX A/C operation to exit.
Push the Recirculation button to change the system between recirculation mode and outside air mode. The Recirculation indicator and the A/C indicator illuminate when the Recirculation button is pressed. Recirculation can be used when outside conditions, such as smoke, odors, dust, or humidity are present. Recirculation can be used in all modes except for Defrost. Recirculation may be unavailable if conditions exist that could create Press and release the OFF button on the touchscreen, or push the OFF button on the faceplate (if equipped) to turn the Climate Control on/off.