GETTING TO KNOW YOUR VEHICLE 61 Bi-Level Mode A UTOMATIC T EMPERATURE C ONTROL (ATC) — I F E QUIPPED To provide you with maximum comfort in the Automatic mode during cold start-ups, the blower fan will remain on low until the engine warms up. The blower will increase in speed and transition into Auto mode. Manual Operation Override Air comes from the instrument panel outlets and floor outlets. A slight amount of air is directed through the defrost and side window demister outlets. Automatic Operation 1. Push the AUTO button on the faceplate, or the AUTO button on the touchscreen on the Automatic Temperature Control (ATC) Panel. NOTE:
Bi-Level mode is designed under comfort condi tions to provide cooler air out of the panel outlets and warmer air from the floor outlets. Floor Mode This system offers a full complement of manual override features. The AUTO symbol in the front ATC display will be turned off when the system is being used in the manual mode. C LIMATE V OICE R ECOGNITION 2 2. Next, adjust the temperature that you would like the system to maintain by adjusting the driver and passenger temperature control buttons. Once the desired temperature is displayed, the system will achieve and automatically maintain that comfort level. Air comes from the floor outlets.
A slight amount of air is directed through the defrost and side window demister outlets. Mix Mode Adjust vehicle temperatures hands-free and keep everyone comfortable while you keep moving ahead. 3. When the system is set up for your comfort level, it is not necessary to change the settings. You will experience the greatest efficiency by simply allowing the system to function automatically. Air is directed through the floor, defrost, and side window demister outlets. This setting works best in cold or snowy conditions that require extra heat to the windshield. This setting is good for maintaining comfort while reducing moisture on the windshield. Push the VR button on the steering wheel.
After the beep, say one of the following commands: “Set driver temperature to 70 degrees” NOTE: It is not necessary to move the temperature settings for cold or hot vehicles. The system automatically adjusts the temperature, mode, and blower speed to provide comfort as quickly as possible. Did you know: Voice Command for Climate may only be used to adjust the interior temperature of your vehicle. Voice Command will not work to adjust the heated seats or steering wheel if equipped. “Set passenger temperature to 70 degrees” The temperature can be displayed in US or Metric units by selecting the US/Metric customer-programmable feature within Uconnect Settings Ъ page216.