96 GETTING TO KNOW YOUR VEHICLE Second Panel Position Position Two (Fully Unfolded) Pull Up On Tonneau Cover Corners NOTE: Unfold the panel gently, and do not allow the panels to drop under their own weight. 7. Completely unfold the Tonneau Cover. 8. Repeat steps 2 through 3 for the rear pair of latches. 10. Gently pull up on all four corners of the Tonneau Cover to ensure that it is properly latched. 9. Pull down on the handle to ensure the Slide Locking Lever is fully engaged. Do this for both the left and right side. CAUTION! CAUTION! The vehicle cannot be driven when the Tonneau Cover is in the second panel position. NOTE:
Also check to ensure the bumper is forward of the bead on the underside of the truck flange. Make sure that the Tonneau Cover is positioned fully forward, so that the bumper clears the bead. It is the driver’s responsibility to ensure the Tonneau Cover is properly installed on the vehicle. Failure to follow this procedure can result in detachment of the Tonneau Cover from the vehicle and/or damage to the vehicle/ Tonneau Cover. T RI -F OLD T ONNEAU C OVER C LEANING For proper cleaning of the Tonneau Cover, use Mopar® Whitewall & Vinyl Top Cleaner and Mopar® Leather & Vinyl Conditioner/Protectant.