R2.8 CM2220 R101B Engine Identification Section E - Engine and System Identification Page E-1 Engine Identification Engine Dataplate Have the following engine data available when communicating with a Cummins® Authorized Repair Location. The information on the dataplate is mandatory when sourcing service parts. NOTE: The dataplates used on engines may differ in appearance and location of information. The following illustrations show examples of common dataplates used and the information contained on these dataplates. NOTE: The dataplates used on engines may differ in appearance and location of information.
The following illustrations show examples of common dataplates used and the information contained on these dataplates. The engine dataplate shows specific facts about an engine. The dataplate is typically located on the engine rocker lever cover, but may also be located on the side of the gear housing. The engine serial number and CPL provide data for ordering parts and performing service. The engine dataplate must not be changed unless approved by Cummins Inc. 1 Engine serial number 2 Engine model information 3 Control parts list (CPL) 4 Valve lash (overhead) setting 5 Horsepower and rpm rating.
To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com