R2.8 CM2220 R101B Engine Identification Section E - Engine and System Identification Page E-3 Fuel Injection Pump Dataplate The Bosch™ fuel injection pump dataplate is located on the fuel pump. The dataplate contains the following information that will assist in servicing or replacement: Pump serial number Cummins® part number Factory code Bosch™ part number Date code. Engine Control Module Dataplate The ECM dataplate shows information about the ECM and how the ECM was programmed. This dataplate is located on the ECM. The following information is available on the ECM dataplate: ECM part number (PN) ECM serial number (SN) ECM date code (DC) Engine serial number (ESN) ECM code:
Identifies the software in the ECM. NOTE: Have the ECM code for the engine available when communicating with a Cummins® Authorized Repair Location. Turbocharger Dataplate The Holset® turbocharger dataplate is located on the turbocharger inlet compressor housing. The dataplate contains the following information that will assist in servicing or replacement: Cummins® assembly part number Serial number Customer number Model number. To buy Cummins Parts and Service Manuals, Training Guides, or Tools go to our website at https://store.cummins.com