OPERATION Action When Warning is Generated When Displaying Camera Image If an error or alarm occurs while the camera image is being displayed, the error monitor or alarm monitor is displayed at the top left of the screen and flashes. If the error monitor or alarm monitor is displayed, press switch F6, return to the standard screen, and check the content of the error or alarm display. When the error monitor is flashing, if no lever is operated for more than ten seconds, the screen automatically returns to the standard screen. When the screen returns to the standard screen, the error monitor at the top left of the screen goes out and the error or alarm is displayed in the center of the screen.
If an error monitor is displayed, move the machine, set it in a safe posture, then have inspection carried out immediately. For details of the content of the warning displays, See “Travel Speed Selector Switch” on page 2-30, “Basic Check Monitors” on page 2-16, “Caution Monitors” on page 2-13, “Emergency Monitors” on page 2-11 and “TROUBLES AND ACTIONS” on page 2-196. 2-40 PC200LC-8