OPERATION Other Mode Operations When Displaying Camera Image Even during the camera display, it is possible to operate other modes. The air conditioner can be operated. If the air conditioner switch is operated, the screen switches to the control screen. If the screen switches to the air conditioner control screen, press switch F6 to return to the camera image screen. In addition, if no operation is carried out for five seconds after the screen switches to the air conditioner control screen, the screen automatically returns to the camera image screen. For details of the operation of the air conditioner, See “AIR CONDI- TIONER CONTROLS” on page 2-93.
It is possible to change the working mode by pressing the working mode selector switch. For details of the working mode selector switch, See “Working Mode Selector Switch” on page 2-25. If the working mode is changed, the screen returns to the standard screen. Press switch F3 again to return to the camera image display. When the working mode is changed, the screen returns automatically to the camera image screen. When this happens, the pilot monitor display at the top right of the monitor screen is highlighted in yellow for two seconds, then returns to blue. PC200LC-8 2-37