SECTION 2 SAFETY PRECAUTIONS Page 4 GENERAL Fig. 2.1. Fire Extinguisher Placement for Machine with Grammer Seat If machine is equipped with other than Grammer seat the extinguisher is placed on the structure ROPS on the left side of the machine. (Fig. 2.1A) Fig. 2.1A. Fire Extinguisher Placement for Machine with other than Grammer Seat A dry powder fire is placed in a holder preventing its free movement during machine operation. In case of a fire the extinguisher can be easily removed from the holder. The extinguisher is provided with a label containing the instructions of its use and application. The operator should be familiar with these instructions. Do not jump on or off the machine.
Keep two hands and one foot or two feet and one hand in contact with the steps and grab handles and rails at all times. Electrical system is 24-volt negative ground. Each machine is equipped with a starting receptacle. It should be used when starting the machine using booster batteries. In case the receptacle cannot be used the following precautions must be taken to minimize chances of injury or damage to electrical parts. TD-15H DRESSTA